• Product Category
  • Damper
  • Application
  • Control
  • Frame Material
  • Galvanized G-90
  • Frame Thickness
  • 14 ga
  • Blade Material
  • Galvanized G-90
  • Blade Thickness
  • 16 ga
  • Blade Type
  • 3V - Single
  • Frame Depth
  • 3.25"
  • Mounting
  • V/H
  • Duct Shape
  • Rectangular / Square
  • Control Type
  • Motorized or Manual
  • Actuator Location
  • Out of Airstream
  • Intake Exhaust
  • Both
  • Max Velocity FPM
  • 2000
  • Unit Mounting
  • Duct
  • Low Leak Avail
  • Yes
  • Options
  • - 12
  • Nylon Bearing [Bushings]
  • - 31
  • Flange
  • - 11
  • Ball Bearings
  • - 14
  • Stainless Steel Bearing Pins (Axles) Straps and Control Rod
  • - 18
  • All (304) Stainless Steel Hardware
  • - 13
  • Stainless Steel Bearings (Bushings)
  • - 87
  • 304 Stainless Steel Construction
  • - 24
  • Right Angle Mixing Set-up, Internal Linkage
  • - 27
  • Face & Bypass Set-up Vertical, External Linkage
  • - 26
  • Face & Bypass Set-up Vertical, Internal Linkage
  • - 21
  • Construction with Blades of Width Approx. 6"
  • - 09
  • Tack Weld Hardware
  • - 15
  • Stainless Steel Brackets, Pivots, Rods
  • - 20
  • Vertical Blades (Blades run parallel to 'A' dimension)
  • - 25
  • Right Angle Mixing Set-up, External Linkage
  • - 28
  • Face & Bypass Set-up Horizontal, Internal Linkage or Jackshaft Only
  • - 89
  • Sleeve up to 16" deep , .18 ga galv. , Specify depth in comments (Min. list $70)
  • - 10
  • 1" Channel Frame (For 1" Internal Duct Insulation)
  • - 92
  • Jackshaft
  • - 92
  • Operator

Vent Products certifies that the Model 5813 damper shown herein is licensed to bear the AMCA Seal. The ratings shown in Airflow Chart 1 and Leakage Chart 2 are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance ratings and air leakage ratings.